NICOLAI NUCLEON 16 SUPRE

The Nicolai Nucleon 16 Supre an enduro bike in the 160–180mm travel category. Its high pivot suspension makes it composed in the rough stuff, but unlike many other high pivot bikes, it has high anti-squat and an efficient drivetrain which makes it great to pedal. The frame is machined and welded out of aluminum in Germany by Nicolai, and it’s equipped with the Supre Drive, made by us in Canada.

A pioneering high-pivot enduro bike offered for sale with the Supre Drive

CUTTING EDGE SUSPENSION

The Nucleon 16 has high pivot suspension with the rear wheel pivoting around the pivot point just in front of the idler pulley. The rearward axle path creates control in the rough. At the same time, the idler pulley has the almost magical effect of reducing pedal kickback.

ROOTED IN HISTORY

There have been earlier models of the Nucleon with a gearbox and high pivot suspension. These bikes lacked derailleur problems, but like all gearbox mountain bikes, the drivetrain was heavy and inefficient. The Nucleon 16 Supre is a modern, Supre version of the Nucleon that shares the gearbox characteristic of toughness while having the advantages of derailleur drivetrains, such as low weight and high efficiency. 

DURABLE

At the suspension pivots, there are O-rings seals in addition to bearings’ wiper seals. This additional sealing increases bearing life. Similarly, the pulleys of the Supre Drive have additional sealing, but because of the efficiency requirements of drivetrains, this additional sealing is achieved with labyrinth seals. The Supre Drive and Nicolai frames share a pursuit for longevity.

Equipped with the Supre Drive

  • ultra durable
  • efficient
  • well damped
  • made in Canada

Geometry

Nicolai lead the charge over the past years toward frame geometry with slacker head tube angles, longer reach, and steeper seat tube angles. The Nucleon takes what they learned from pushing the extremes in that direction and taking a step back to geometry that works well while being versatile. The geometry numbers of the Nucleon can be seen in the tech sheet accessible through the following button. The Nucleon 16 is available in five frame sizes from S to XXL along with the option for custom geometry.

(geometry is in the second tab)

Suspension

This suspension system is single pivot with the shock driven by a linkage.

Anti-rise

Single pivot suspension systems sometimes have too much anti-rise, where the suspension wants to squat too much from braking. However, high anti-rise is not an inherent trait of single pivot suspension. By having the main pivot far forward, the anti-rise of the Nucleon 16 is reduced. It has a level of anti-rise that strikes a balance with both traction and geometry maintained while braking. (The following graph assumes a center of mass height of 1100mm.)

Anti-squat

The Nucleon’s anti-squat is high and it increases toward the high gears. This may seem counter-intuitive since we pedal so much in our low gears, but it makes sense because when in low gears, riders often sit while pedalling, and when in high gears, riders often stand up while pedaling. There are additional bob-inducing forces while standing up and pedalling. For neutralizing these forces, more anti-squat is needed. Increasing anti-squat toward high gears is a characteristic that’s shared by other bikes that are known to pedal well. Overall, the Nucleon 16 has great pedalling characteristics. (The following graph assumes a center of mass height of 1100mm.)

Leverage ratio

The leverage ratio is progressive. This is optimized for coil shocks or large volume air shocks. Also, the overall leverage ratio is high, which generally makes the suspension supple and lively (depending on the shock settings).

Axle path

The Nucleon 16 has a rearward axle path that makes it mow over bumps and maintain momentum. The idler pulley enables this axle path, keeping pedal kickback low despite the high anti-squat. Note that the axle path graph is magnified (stretched horizontally to make the graph more useful).

a bold leap forward in mountain bike design

Nicolai Nucleon 16 Supre

North American distribution

Shipping an individual frame from Germany to North America is expensive. To reduce this cost while also providing local after-sales support, we at Lal Bikes distribute Nucleon 16 frames in Canada and the United States. Our after-sales support includes replacement parts and guidance on frame maintenance procedures, with our in-depth understanding of both the frame and drivetrain. Also, we can offer complete, custom builds with parts sourced through North American distributors. Our goal is to make ownership of a Nicolai Nucleon 16 in North America as easy and affordable as possible. Customers in Canada and the United States can order the Nucleon 16 frame and the Supre Drive through our online shop. Customers in Europe are asked to order these directly from Nicolai. If you have any questions, please don’t hesitate to contact us.